Harrison Products Home
Stainless Steel LatchesStainless Steel HingesStainless Steel Drop RodsAluminum SectionAluminum HingesAluminum Drop RodsZinc Plated LatchesStainless Steel HingesStainless Steel Drop RodsComposite Latches Composite Hinges Composite Drop Rods Composite Handles Composite Gate Stops vinyl Accessories Composite2 Clearance
   
 
 
  HINGES - COMPOSITE  
 

TRU•CLOSE safety gate hinges
are molded from special glass-fiber reinforced polymer materials.
These UV-stabilized materials provide strong, rust-free hinges
that won’t bind, sag or stain! And they never require lubrication.

The unique, spring-loaded adjustor within most TRU•CLOSE hinges allows instant incremental tension adjustment using only a screwdriver. Gates of different sizes and weights incur different loads, so the ability to adjust tension quickly is critical, especially in child safety areas.

 
     
 

Precision Engineered & Superbly Finished

Tired of spending money replacing and repairing gate closers?
Worried about liability when your gate doesn’t close?
Fed up with the noisy, bulky closers?
We have an alternative. SureClose was designed to replace conventional hinges, closers and header arrangements, through its unique design that hides the closer hydraulics inside the fence post.

Designed for commercial, industrial, custom residential and estate gates, SureClose comes in three basic models, with mounting brackets that cover most any square post installation, including steel or aluminum, flush mounted or center mounted, fastened or welded, with adjustable self-closing speed. Models are also available that feature a final snap action for overcoming electric or coded locks found in many security applications and a non-self-closing version for access control and most heavy commercial or residential gates with a point load up to 1,500 lbs. (680kg.).

 
     
 

SureClose® Hinges & Closers

All SureClose hinges and closers come packaged with the gate mounting bracket included. Post mounting brackets sold separately.

 
 

SureClose SM Hinge, Non-Self-Closing
The SureClose SM hinge was designed for large, heavy commercial and residential gates with a point load up to 1,500 lb. (680kg.). Ideal for access control gates. The SM model features extra large hinge pins and dual thrust bearings designed for high loads. Save money when SM is used as the bottom load bearing hinge along with a SureClose 57 or SureClose 108 closer.

 
 

SureClose 57 & 57SF
SureClose 57 is a concealed hydraulic gate closer. It is speed adjustable using the enclosed adjustment tool and designed to never leak hydraulic fluid. Extremely safe and does not offer resistance if closed quickly in an emergency. Soft, quiet closure also protects the latching/locking system. A real workhorse tested to 500,000 open/close cyles and a 1,500 lb (680kg) point load.
SureClose 57SF is suitable for pool and safety gates. SF models open to and self-close from 90°.* NO hold-open feature.
*CAUTION: When used on swimming pool gates, always consult local authorities for swimming pool codes.

 
 

SureClose 108 & 108SF
SureClose 108 is a concealed hydraulic gate closer. It features Final Snap Action (FSA) which increases speed at the end of closing to overcome electric or coded locks. Both closing speed and FSA are adjustable using the enclosed adjustment tool.
Designed to never leak hydraulic fluid, the SureClose 108 is extremely safe and does not offer resistance if closed quickly in an emergency. Soft, quiet closure also protects the latching/locking system. Tested to 500,000 open/close cyles and a 1,500 lb (680kg) point load.
SureClose 108SF is suitable for pool and safety gates. SF models open to and self-close from 90°.* NO hold-open feature.
*CAUTION: When used on swimming pool gates, always consult local authorities for swimming pool codes.

 
     
 

SureClose® Post Mounting Brackets

Aluminum or steel, fastened or welded, flush or center-mounted, the SureClose Post-Mounting Brackets have the answer to your post applications.

 
 

Flush Mount Brackets:

 
 

7515 - Type: 6026-05
Aluminum Mounting Bracket Minimum post size 2"x2" (50x50mm) required. Predrill using 3/16" (5mm) drill bit and use #14 countersunk through bolts or fasteners.

7525 - Type: 0510-04
Steel Mounting Bracket Steel, weldable post bracket must be finished. Protect threads and moving parts when powder coating or painting. Minimum post size 2"x2" (50x50mm) required.

 
 

Center Mount Brackets:

 
 

7511 - Type: 6026-01
Aluminum Mounting Bracket Horizontally Adjustable Minimum post size 2 ½” x 2 ½” (64x64mm) required. Predrill using 1/4" (6mm) drill bit and use #18 countersunk through bolts or fasteners.

7512 - Type: 6026-02
Aluminum Mounting Bracket Horizontally Adjustable Minimum post size 2 ½” x 2 ½” (64x64mm) required. Predrill using 3/16" (5mm) drill bit and use #14 countersunk through bolts or fasteners.

7513 - Type: 6026-03
Aluminum Mounting Bracket Horizontally Adjustable Minimum post size 4"x4" (100x100mm) required. Predrill using 3/16 (5mm) drill bit and use #14 countersunk through bolts or fasteners.

7514 - Type: 6026-04
Aluminum Mounting Bracket. Added fixing clamp prevents slippage. Great for single hinge applications such as turnstiles. Minimum post size 2 ½” x 2 ½” (64x64mm) required. Predrill using 3/16" (5mm) drill bit and use #14 countersunk through bolts or fasteners.

7526 - Type: 0510-05
Steel Mounting Bracket Horizontally Adjustable Steel, weldable post bracket must be finished. Protect threads and moving parts when powder coating or painting. Minimum post size 2 ½” x 2 ½” (64x64mm) required.